Pinouts for Choplifter
(also works with Pitfall II and all the Wonderboy games)
Typed up by Graham Bisset (22-Aug-1995, graham@aberdeen.wireline.slb.com)
Updated by John Goggan (28-Jun-1999, jgoggan@dcg.com)
Graham's Note: My original board was not marked as to where 1 started
and 22 finished, so hold the board with the edge connector nearest you
and the parts on the top. Pin 1 is the furthest to the left. Make the
cable at your own risk!
Happy rescuing! :-)
Parts | Solder
---------------------------------------------------
GND 1 | A GND
GND 2 | B GND
+5v 3 | C +5v
+5v 4 | D +5v
N/C 5 | E Coin Mtr 2
+12v 6 | F N/C
N/C 7 | H N/C
Button 1 PL1 8 | J Button 1 PL2
Button 2 PL1 9 | K Button 2 PL2
N/C 10 | L N/C
PL1 Down 11 | M PL2 Down
PL1 Up 12 | N PL2 Up
PL1 Right 13 | P PL2 Right
PL1 Left 14 | R PL2 Left
Coin Sw 1 15 | S Start SW PL1
Coin Sw 2 16 | T Start SW PL2
Test Sw 17 | U N/C
Service Sw 18 | V N/C
Spk + 19 | W Spk -
Video Red 20 | X Video Green
Video Blue 21 | Y Video Sync
GND 22 | Z GND