QuarterArcade Coin-Op Tech Net

Quick Nav: # A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Coin-Op : Arcade : Lock 'n' Chase : KB-1558-115

Title

Lock 'n' Chase Pinout

Author

spies.com

Article

Lock 'n Chase
Data East (DECO), 1981
Licensed to Taito.

This is the pinout for the dedicated board version of the game, not
a diagram for the DECO cassette system.


CN2 - 18/36 Edge Connector (0.156" pin spacing)

  Solder Side  |  Parts Side
-----------+---+---+-----------
       +12 | A | 1 | +12
        +5 | B | 2 | +5
       GND | C | 3 | GND
        NC | D | 4 | NC
        NC | E | 5 | NC
    Coin 1 | F | 6 | Coin 2
        NC | H | 7 | NC
  1P Start | J | 8 | 2P Start
        NC | K | 9 | NC
   1P Lock | L | 10| 2P Lock
   1P Down | M | 11| 2P Down
     1P Up | N | 12| 2P Up
   1P Left | P | 13| 2P Left
  1P Right | R | 14| 2P Right
 Speaker + | S | 15| NC
 Speaker - | T | 16| GND
       GND | U | 17| GND
       GND | V | 18| GND


CN4 - 6 pin MTA Connector (0.100" pin spacing)

1 Video Sync (Composite -)
2 NC
3 Video GND
4 Video Blue
5 Video Green
6 Video Red


CN5 - 6 pin Connector (type?)
Note: For this header, you can steal one of the 5 pin connectors
from a non-working Electrohome GO-7 monitor chassis.  Connect it to
pins 2 through 6 and wire it appropriately.

1 +5
2 +5
3 +12
4 -5
5 GND
-GAP-
6 GND




powered by ggdb.com this page took approx. 0.004s